出售域名  LinuxTags

函数参考
PHP Manual Linux Tags

Mcrypt Encryption Functions

简介

This is an interface to the mcrypt library, which supports a wide variety of block algorithms such as DES, TripleDES, Blowfish (default), 3-WAY, SAFER-SK64, SAFER-SK128, TWOFISH, TEA, RC2 and GOST in CBC, OFB, CFB and ECB cipher modes. Additionally, it supports RC6 and IDEA which are considered "non-free".

需求

These functions work using » mcrypt. To use it, download libmcrypt-x.x.tar.gz from » http://mcrypt.sourceforge.net/ and follow the included installation instructions. Windows users will find all the needed compiled mcrypt binaries at » http://files.edin.dk/php/win32/mcrypt/.

As of PHP 5.0.0 you will need libmcrypt Version 2.5.6 or greater.

If you linked against libmcrypt 2.4.x or higher, the following additional block algorithms are supported: CAST, LOKI97, RIJNDAEL, SAFERPLUS, SERPENT and the following stream ciphers: ENIGMA (crypt), PANAMA, RC4 and WAKE. With libmcrypt 2.4.x or higher another cipher mode is also available; nOFB.

安装

You need to compile PHP with the --with-mcrypt[=DIR] parameter to enable this extension. DIR is the mcrypt install directory. Make sure you compile libmcrypt with the option --disable-posix-threads.

运行时配置

这些函数的行为受 php.ini 的影响。

Mcrypt configuration options
Name Default Changeable Changelog
mcrypt.algorithms_dir NULL PHP_INI_ALL Available since PHP 4.0.2.
mcrypt.modes_dir NULL PHP_INI_ALL Available since PHP 4.0.2.
有关 PHP_INI_* 常量进一步的细节与定义参见php.ini 配置选项。

资源类型

mcrypt_module_open() returns an encryption descriptor.

预定义常量

以下常量由本扩展模块定义，因此只有在本扩展模块被编译到 PHP 中，或者在运行时被动态加载后才有效。

Mcrypt can operate in four block cipher modes (CBC, OFB, CFB, and ECB). If linked against libmcrypt-2.4.x or higher the functions can also operate in the block cipher mode nOFB and in STREAM mode. Below you find a list with all supported encryption modes together with the constants that are defines for the encryption mode. For a more complete reference and discussion see Applied Cryptography by Schneier (ISBN 0-471-11709-9).

  • MCRYPT_MODE_ECB (electronic codebook) is suitable for random data, such as encrypting other keys. Since data there is short and random, the disadvantages of ECB have a favorable negative effect.
  • MCRYPT_MODE_CBC (cipher block chaining) is especially suitable for encrypting files where the security is increased over ECB significantly.
  • MCRYPT_MODE_CFB (cipher feedback) is the best mode for encrypting byte streams where single bytes must be encrypted.
  • MCRYPT_MODE_OFB (output feedback, in 8bit) is comparable to CFB, but can be used in applications where error propagation cannot be tolerated. It's insecure (because it operates in 8bit mode) so it is not recommended to use it.
  • MCRYPT_MODE_NOFB (output feedback, in nbit) is comparable to OFB, but more secure because it operates on the block size of the algorithm.
  • MCRYPT_MODE_STREAM is an extra mode to include some stream algorithms like WAKE or RC4.

Some other mode and random device constants:

MCRYPT_ENCRYPT (integer)
MCRYPT_DECRYPT (integer)
MCRYPT_DEV_RANDOM (integer)
MCRYPT_DEV_URANDOM (integer)
MCRYPT_RAND (integer)

Mcrypt ciphers

Here is a list of ciphers which are currently supported by the mcrypt extension. For a complete list of supported ciphers, see the defines at the end of mcrypt.h. The general rule with the mcrypt-2.2.x API is that you can access the cipher from PHP with MCRYPT_ciphername. With the libmcrypt-2.4.x and libmcrypt-2.5.x API these constants also work, but it is possible to specify the name of the cipher as a string with a call to mcrypt_module_open().

  • MCRYPT_3DES
  • MCRYPT_ARCFOUR_IV (libmcrypt > 2.4.x only)
  • MCRYPT_ARCFOUR (libmcrypt > 2.4.x only)
  • MCRYPT_BLOWFISH
  • MCRYPT_CAST_128
  • MCRYPT_CAST_256
  • MCRYPT_CRYPT
  • MCRYPT_DES
  • MCRYPT_DES_COMPAT (libmcrypt 2.2.x only)
  • MCRYPT_ENIGMA (libmcrypt > 2.4.x only, alias for MCRYPT_CRYPT)
  • MCRYPT_GOST
  • MCRYPT_IDEA (non-free)
  • MCRYPT_LOKI97 (libmcrypt > 2.4.x only)
  • MCRYPT_MARS (libmcrypt > 2.4.x only, non-free)
  • MCRYPT_PANAMA (libmcrypt > 2.4.x only)
  • MCRYPT_RIJNDAEL_128 (libmcrypt > 2.4.x only)
  • MCRYPT_RIJNDAEL_192 (libmcrypt > 2.4.x only)
  • MCRYPT_RIJNDAEL_256 (libmcrypt > 2.4.x only)
  • MCRYPT_RC2
  • MCRYPT_RC4 (libmcrypt 2.2.x only)
  • MCRYPT_RC6 (libmcrypt > 2.4.x only)
  • MCRYPT_RC6_128 (libmcrypt 2.2.x only)
  • MCRYPT_RC6_192 (libmcrypt 2.2.x only)
  • MCRYPT_RC6_256 (libmcrypt 2.2.x only)
  • MCRYPT_SAFER64
  • MCRYPT_SAFER128
  • MCRYPT_SAFERPLUS (libmcrypt > 2.4.x only)
  • MCRYPT_SERPENT(libmcrypt > 2.4.x only)
  • MCRYPT_SERPENT_128 (libmcrypt 2.2.x only)
  • MCRYPT_SERPENT_192 (libmcrypt 2.2.x only)
  • MCRYPT_SERPENT_256 (libmcrypt 2.2.x only)
  • MCRYPT_SKIPJACK (libmcrypt > 2.4.x only)
  • MCRYPT_TEAN (libmcrypt 2.2.x only)
  • MCRYPT_THREEWAY
  • MCRYPT_TRIPLEDES (libmcrypt > 2.4.x only)
  • MCRYPT_TWOFISH (for older mcrypt 2.x versions, or mcrypt > 2.4.x )
  • MCRYPT_TWOFISH128 (TWOFISHxxx are available in newer 2.x versions, but not in the 2.4.x versions)
  • MCRYPT_TWOFISH192
  • MCRYPT_TWOFISH256
  • MCRYPT_WAKE (libmcrypt > 2.4.x only)
  • MCRYPT_XTEA (libmcrypt > 2.4.x only)

You must (in CFB and OFB mode) or can (in CBC mode) supply an initialization vector (IV) to the respective cipher function. The IV must be unique and must be the same when decrypting/encrypting. With data which is stored encrypted, you can take the output of a function of the index under which the data is stored (e.g. the MD5 key of the filename). Alternatively, you can transmit the IV together with the encrypted data (see chapter 9.3 of Applied Cryptography by Schneier (ISBN 0-471-11709-9) for a discussion of this topic).

范例

Mcrypt can be used to encrypt and decrypt using the above mentioned ciphers. If you linked against libmcrypt-2.2.x, the four important mcrypt commands (mcrypt_cfb(), mcrypt_cbc(), mcrypt_ecb(), and mcrypt_ofb()) can operate in both modes which are named MCRYPT_ENCRYPT and MCRYPT_DECRYPT, respectively.

Example#1 Encrypt an input value with TripleDES under 2.2.x in ECB mode

<?php
$key = "this is a secret key";
$input = "Let us meet at 9 o'clock at the secret place.";

$encrypted_data = mcrypt_ecb (MCRYPT_3DES, $key, $input, MCRYPT_ENCRYPT);
?>
This example will give you the encrypted data as a string in $encrypted_data.

If you linked against libmcrypt 2.4.x or 2.5.x, these functions are still available, but it is recommended that you use the advanced functions.

Example#2 Encrypt an input value with TripleDES under 2.4.x and higher in ECB mode

<?php
    $key = "this is a secret key";
    $input = "Let us meet at 9 o'clock at the secret place.";

    $td = mcrypt_module_open('tripledes', '', 'ecb', '');
    $iv = mcrypt_create_iv (mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
    mcrypt_generic_init($td, $key, $iv);
    $encrypted_data = mcrypt_generic($td, $input);
    mcrypt_generic_deinit($td);
    mcrypt_module_close($td);
?>
This example will give you the encrypted data as a string in $encrypted_data. For a full example see mcrypt_module_open().

Table of Contents

函数参考
PHP Manual Linux Tags

出售域名  LinuxTags